Metallographic Testing Instruments

Astro XQ-2B metallographic specimen inlaying machine is suitable for thermosetting polymer pressing of tiny metallographic specimen which is not plastic and difficult to get. After forming, the sample can be grinded and polished conveniently, and the microstructure can be measured by metallographic microscope. 1, Product description: The machine is suitable for the thermosetting polymer pressing of the tiny metallographic specimen which is not plastic and is not easy to get.

Product highlights The touch screen interface is clear, the function layout is reasonable, the parameters are quickly modified, and the data is visually displayed Manual operation, according to the flexible selection of electric feed, manual operation platform or Cutting pieces and other cutting methods Small body, large platform, flexible with a variety of fixtures for sample clamping Self-contained independent circulating filter cooling water tank, easy to clean, save space

Product highlights Optical system with infinite chromatic aberration correction Long working distance, flat field achromatic objective, clear image, flat image plane It is equipped with reflective Cora illumination system to provide uniform and sufficient illumination for objective lenses with different magnifications Inverted three-way observation tube, 25 ° tilt, greatly improving the observation comfort and adaptability of operation Best ergonomic design, high rigid tube,

The modular design of the BX53M series provides a variety of solutions for a wide range of materials and industrial applications. According to different applications in industry and materials science, it can be combined into reflection microscope, transmission and reflection microscope, infrared microscope, polarized light microscopy and so on. Features: Simple, wizard-style microscope operation setup makes it easy for the user to make adjustments and copy system settings.

Important notes and safety information The automatic grinding and polishing machine is a single-disk desktop machine, which is a new generation of high-precision and automatic grinding and polishing equipment for sample preparation process based on international standards and Advanced International Technology. The rotating direction of the grinding and polishing plate can be arbitrarily selected, the grinding and polishing plate can be quickly replaced, and the multi-sample

Printed circuit board metallographic section sampling machine (fully automatic) Application: for sampling in metallography laboratory of PCB factory (PCB board has no assembling component) Technical parameters: Maximum sampler size: length x width x height = 50x50x8mm; Set sampling size: according to customer requirements to determine (usually 20 mm x 15 mm) Maximum sample size 16“* 24”(can reach any position on PCB board) Sampler spindle: 24000R/min/AC220V/50HZ Sampler Gong

Product highlights The grinding and polishing machine consists of a base, a grinding and polishing plate and a control panel. The machine adopts good and practical ABS shell, with beautiful, anti-corrosion, anti-rust and other characteristics. The motor is fixed on the base, the shaft is driven by a triangular belt, the grinding plate is sleeved on the shaft, and is driven by the key to rotate, the switch is directly fixed on the body, and the water sand paper is pasted or

product hightlights The MX-6R is ergonomically designed to minimize operator fatigue. Its modular component design allows the free combination of system functions. It covers bright field, dark field, oblique illumination, polarized light, DIC differential interference and other observation functions, which can be selected according to practical application. 1, large travel mobile platform design: using large platform design, can be applied to the corresponding size of the