Manual Plate Sulphurizer Thermal Pressure Machine
一, Introduction:
The ASTRO-KH6014H series of manual hydraulic flat vulcanizing presses is the primary equipment for the compression molding of a wide range of rubber products, both molded and non-molded. It is also suitable for the compression molding of various thermosetting and foamed plastic products. The machine features an independent hydraulic power unit and an electrical system, and is operated via a centralized push-button control panel. Both the operating pressure and the heating temperature are adjustable within a specified range.
II. Technical Specifications:
|
Model |
KH6014H-5 |
KH6014H-10 |
KH6014H-20 |
|
Pressure capacity |
5T |
10T |
20T |
|
Pressure gauge |
Manual pressure control via hydraulic gauge |
||
|
Pressure Plate Dimensions (mm, Metric) |
200*200/300*300/350*350/400*400/450*450/500*500 [mm] |
||
|
Hot Press Platen Material |
Constructed from high-temperature resistant imported steel plate, featuring a surface-carburized and quenched finish. The specially treated heat-conducting block ensures parallel pressure application without deformation and offers excellent wear resistance. |
||
|
Pressure plate hardness |
50~60HRC |
||
|
Pressure Plate Flatness |
<0.03mm |
||
|
Parallelism of the pressure plate |
<0.16mm |
||
|
Temperature range |
Room Temperature to -200°C [Customizable up to 300°C] |
||
|
Temperature uniformity |
1.5°C [The larger the pressure plate, the higher the temperature and the poorer the temperature uniformity.] |
||
|
Temperature controller |
Temperature controllers (2 units) |
||
|
Temperature Control Mode |
pid auto-tuning, combined with a high-precision sensor, provides a temperature control accuracy of ±1.0°c. |
||
|
Timer |
LED Time Range: 0.1s to 99 min to 9.9 h |
||
|
Heater |
Heating mold with a built-in cylindrical shape |
||
|
Heating time |
Approximately 15 minutes to reach 160°C from room temperature. |
||
|
Two heating plates |
The temperature of each hot plate can be set and controlled independently. |
||
|
Heating method |
Electric heating |
||
|
Cooling method |
Natural cooling |
||
|
Hydraulic cylinder stroke |
Max 100mm (Customizable) |
||
|
Hydraulic Cylinder Speed |
5mm/s [Manual] |
||
|
Pressure gauge |
0~200kg/sq.cm |
||
|
Mold Opening Method |
Manual raise and lower |
||
|
Main Unit Dimensions (mm) |
400X550X600 |
500x550x600 |
550x550x600 |
|
Power supply voltage |
AC220V/50HZ |
AC220V/50HZ |
AC220V/50HZ |
|
Total unit weight |
150kg |
200kg |
230kg |
Mr. WU
- Email: 13113126980@163.com
- Tel: +86 13113126980
- WhatsApp: 8613113126980
-
WeChat:
arstun
-
MX6R Ergonomic Metallographic Microscope with Modular Precise Nosepiece
product hightlights The MX-6R is ergonomically designed to minimize operator fatigue. Its modular component design allows the free combination of system functions. It covers bright field, dark field, oblique illumination, polarized light, DIC differential interference and other observation functions... -
Cutting Machine For Metallographic Specimen
Product highlights The touch screen interface is clear, the function layout is reasonable, the parameters are quickly modified, and the data is visually displayed Manual operation, according to the flexible selection of electric feed, manual operation platform or Cutting pieces and other cutting ... -
Metallographic Specimen Inlaying Machine XQ-2B
Astro XQ-2B metallographic specimen inlaying machine is suitable for thermosetting polymer pressing of tiny metallographic specimen which is not plastic and difficult to get. After forming, the sample can be grinded and polished conveniently, and the microstructure can be measured by metallographic ... -
Press For Fluidity Test_LD11
一,Usage: used for resin fluidity test of semi-curing sheet in PCB, epoxy resin, carbon fiber and prepreg industry. The machine has stable performance and high precision. Compliance criteria: IPC-TM-6502.3.17; SAE AMS 290; ASTM D3123, ISO 12115, Aerospace Field (SAE/CMH-17); 二,Characteristics: Using ...
