Sports viscosity GEL time tester

I. Overview
This product petroleum product kinematic viscosity automatic measuring instrument is according to the national standard“GB265-88 petroleum product kinematic viscosity determination method” design and manufacture of special testing instrument, suitable for measuring the kinematic viscosity of liquid petroleum products. The instrument has timing sample movement time, automatic calculation of kinematic viscosity of the final results. This method is applicable to the determination of kinematic viscosity of liquid petroleum products (i. e. Newtonian liquids) in units of M 2/s and is commonly used in practice as MM 2/s. The kinetic viscosity can be obtained by multiplying the measured kinematic viscosity by the density of the liquid. This method is to measure the time of a volume of liquid flowing through a calibrated glass capillary viscometer (Pinscher, Ubbelohde) under gravity at a constant temperature, the product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the liquid measured at this temperature. The dynamic viscosity at this temperature is the product of the kinematic viscosity and the density of the liquid at the same temperature.

Scope of application
1. Chemical Industry
Solvents: organic, inorganic, etc. . Polymer Solution: Polyvinyl Alcohol, polyacrylamide, etc. .
Pharmaceutical preparations: ointments, oral solutions, injections, etc. .
2. Food Industry
Food additives: thickeners, stabilizers, etc. . Drinks: fruit juice, carbonated drinks, dairy products, etc. . Syrups: corn syrup, high fructose corn syrup, etc. .
3. The printing industry
Ink: water-based ink, solvent-based ink, etc. . Glue: printing glue, adhesives, etc. .
4. The textile industry
Dyes: textile dyes, printing paste, etc. .
5. Cosmetics
Skin Care: creams, lotions, serums, etc. . Shampoo, shower gel, etc. .
6. Research Institutes
Basic Research: the study of the physical properties of liquids. New Materials: new polymers, nanomaterials, etc. .

III. Implementing standards
GB/T265“Determination of kinematic viscosity of petroleum crystals and calculation of dynamic viscosity skin”;
GB/T 1841 test method for viscosity of polyolefin resin filter;
SY/T5651 specification for kinematic viscosity tester for petroleum products.

Iv. Technical parameters
Test methods: Pinschers and Ubbelohde.
Temperature range: Room TEMPERATUREー + 150 °C accuracy ± 0.01 °C.
Temperature sensor: German class A Pt100 stainless steel probe, built-in temperature correction, reliable test results.
Heating method: electric heating unit, the maximum heating power is 1600W.
Display: 7-inch industrial color touch screen.
Temperature calibration: single-point calibration, multi-point calibration optional.
Data storage: 10,000 test results.
Dimensions: 530 * 310 * 232.5(mm)
Work Environment:
Temperature: 10-35 °C
Humidity: 50% relative humidity or less
Operating Voltage: 220V50HZ